Distinguish gradual deformation from dynamic response
Bridge and tunnel monitoring must account for both changes in geometry and short-duration responses to traffic, construction or environmental conditions. The layout should distinguish deformation along the structure from local movement at bearings, piers, joints and other critical points.
The behavior being investigated determines the measurement type and location. A deformation profile, a tilt reading and a crack-opening measurement describe different aspects of the structural response.
What to measure
- Tunnel convergence and longitudinal settlement
- Tilt of piers, bearings and structural members
- Vibration frequency, amplitude and acceleration
- Crack opening and expansion-joint movement
Recommended instruments
The RT-1010 Array Displacement Meter measures deformation along a sensor string, including tunnel convergence with the appropriate installation arrangement. The RT-1030 supports local tilt and vibration measurements at a single point.
The draw-wire RT-1060 measures relative displacement where a longer range is required. The rod-type RT-1080 suits compact crack and expansion-joint installations. Mounting geometry and expected movement determine the appropriate arrangement.
Installation notes
Fix brackets rigidly to the monitored structure and protect them from construction impacts. Record each sensor’s axis orientation, baseline and installation photographs. Keep these records with the data so that a change in mounting can be distinguished from a change in the structure.
Frequently asked questions
What does measuring tilt and vibration together add?
Measurements from the same point can show whether a change in tilt coincided with a vibration event. This helps engineers distinguish a gradual trend from a short-duration dynamic response.

